Built from solid timber, this heavy duty, commercial nest swing is ideal for public use at parks, schools, nurseries, hotels, pubs.
Kit includes all the timber, fixings and full installation instructions (anchors not included).
• Timber Pack Cut To Size
• S - Swing Nest (ø 100 cm)
• Bolt Protection Caps
• Solid Floor Brackets Swing x 4
• Swing Brackets x 6
• Swing Fittings x 4
• Manuals 1-4
• Product Identification
• Building Tools
All Hy-land Projects are type-approved and certified by an independent test organization, TüV Rheinland. When Hy-land Projects are built according to the instructions, then each Project complies with EN 1176 : 2008. This is the European standard for playground equipment for public / commercial use. For example for restaurants, hotels, stores, day care centres, sport clubs, camp sites and controlled community areas.
User age: 3 - 12
Assembly time by 2 people: 4hrs
Dimension: 4,2 x 2,1 x 2,6 m
Critical fall height: 1,9 m
Area 36 m²
Kit: 1x S-Swing Start, 1x S-Swing Nest (ø 100 cm)
Non-paved construction site: For anchoring in a non-paved surface (e.g. grass, sand) additionally required:
Anchors Set Uni: 2 sets (see 'Options'
Concrete: 520 litre (≈1040 kg)
Paved construction site: For fixation to a paved surface (e.g. with rubber tiles) additional hardware required: e.g. chemical anchors, expanding plugs/bolts.
Inspection and maintenance
Hy-land projects do not need additional inspections from a test organization, not after assembly and not throughout the year. All Hy-land projects come with a checklist and logbook. You can legitimately carry out the inspections yourself, that are mandatory for public / commercial playgrounds.
Robust dimensions of pressure-treated pine - stainless steel ladder rungs - powder coated steel handgrips, roof brackets and swing brackets - triple-coated non-corrosive screws and bolts - reinforced PVC sandbox covers - polyamide bolt covers - galvanized steel swing chains - stainless steel swing hooks with nylon bearing - shock absorbing light weight EPDM polymer swing seats. All materials apply to the strictest European health and safety requirements, are weatherproof and UV-resistant.
Type of surface
All play equipment must be installed over an impact attenuating surface according to the standard EN 1176-1: 2008 (e.g. rubber, mulch, sand, grass, gravel rated for a fall height ≥ 1.5 m), properly prepared for use in children’s playgrounds. The following is a list of commonly used impact attenuation material: double shredded bark mulch, uniform wood chips, fine gravel, fine sand, rubber tiles, poured in place impact attenuating surfacing. For placement on grass, check local regulations.
Warranty - 2 years