0
You have no items in your shopping cart.

Curved Rail - 3 Sizes

Curved Rail 3 foot radius curve. For coping and base plinth - Suitable for Standard and Large size balustrades.
Curved Rail 3 foot radius curve. For coping and base plinth - Suitable for Standard and Large size balustrades.
Curved Rail 6 foot radius curve. For coping and base plinth - Suitable for Standard and Large size balustrades.
Curved Rail 12 foot radius curve. For coping and base plinth - Suitable for Standard and Large size balustrades.
Curved Rail for creating circular balustrade designs. Used for base and coping - Suitable for Standard and Large size concrete balustrades from our range. Pictured in 'Grey'.
Total:
£9.60
  • Short
  • Full
  • Options
Introduction
Curved Concrete Balustrade Rail. 3' Radius. Suitable for Base and Coping. For Large and Standard size balustrades. THREE curve size options
H 7.6cm (3"), L 59cm (23")
Description
Curved Concrete Balustrade Rail Options

The same rail is used for the Base Plinth and also the Top Coping.
Above and beneath these rails you would add balusters.
Main picture finished (dye) 'Cotswold Buff' - Curved balustrade copings/base plinths are also available in Grey (select)

To create a complete circle you will require

3 feet radius (current product)
12 sections (x 2 for top and bottom) + 24 balusters (2 per section)
Outer width - measured straight across 23" (59cm)
Inner width - measured straight across 18.75" (47.5cm)

6 feet radius
24 sections (x 2 for top and bottom) + 48 balusters (2 per section)
Outer width - measured straight across 20.75" (53cm)
Inner width - measured straight across 18.75" (47.5cm)

12 feet radius
32 sections (x 2 for top and bottom) + 96 balusters (3 per section)
Outer width - measured straight across 29.5" (75.5cm)
Inner width - measured straight across 28" (71cm)

Shapes
Divide by two to create a half circle or by four for a right angle.
If you need access, remove sections to create an entrance point and add pedestals to finish.
Radius measurements are to the inner point of the rail.

'tip - use some string at the specified radius length, fixed to an object in the ground to mark the curve (inner point) and help calculate your requirement.
Options
Size
Colour
Delivery
2-weeks.gif